Colorguard Shiney Aluminum Ceramic Coating Quart

Follow normal ceramic prep procedures.

Prior to spraying blast with Black Beauty, Aluminum Oxide, or sand for prep (DO NOT USE GLASS BEAD).

Wipe down thoroughly with acetone or MEK only and let evaporate completely. Do not use chemical degreasers/phosphatizers.

Place in oven at 450F for 1 hr, remove and let cool.

Apply coating with airbrush or .6-.8mm tip touch up gun. This should be done at 35-40 lbs of air pressure.

Let parts air dry 30-60 minutes.

Fully cures in oven at 500F for 1 hr. Do not place parts in an already heated oven to cure because it will cause solvent pop.