55" Infrared Oven Model FPB55-H1-18

Easily set up banks to configure to the finishing process and product.

Quickly move and store the banks when not in.

Move the banks to assist in other finishing operations.

Models can be oriented to heat small-medium-large parts and can be grouped or aligned

to create an infrared tunnel for use on even the longest coated parts.

Banks range from 33”H x 31”L heat patterns, up to 44”H x 66”L

patterns; Fostoria will provide FREE testing and engineering to design and specify the

equipment needed for the finishing operation.

The individual modular sections on the banks accept short or medium wavelength

infrared emitters, in a large range of wattages and all industrial voltages (1 or 3),

to meet the exact watt densities required for the application.

Efficiency – focus the IR at the product and heat the coating, not the ambient

air; instant on-off; no time wasted bringing emitters up to temperature.

Repeatable results – consistent performance through effective control of the

amount of heat required, even if pass through or dwell times vary; many control

options are available.

Smaller footprint – these IR banks use very little floor space, especially when compared to conventional curing

ovens.

Generally less capital expense – modular design and comparatively less component

and structural costs translate into lower capital expenditures.

Clean and safe – no by-products of combustion; very little maintenance required

and no moving parts on the IR banks.

Heat Sections consist of an integral gold anodized aluminum reflector and GAA end

caps. Standard reflector disperses IR energy across a 130⁰ pattern with

the reflected IR in a tighter 65⁰ pattern.

Standard section is 11” wide and either 44” or 55” long; optional

widths are 5-1/2” and 16-1/2”; optional lengths include 16”,

22”, 31” and 66” lengths.

All sections are designed so they can be bolted together side-by-side or end-to-end;

making the assembly of small, medium and large banks possible.

Sections are designed to accept ONE or TWO short wavelength (T-3 lamps), medium

wavelength (quartz tubes) or long wavelength (metal sheath) IR emitters; at a wide

range of wattages at all standard industrial voltages. All sections/banks can

be wired for single or 3 phase operation; and in series, parallel or combinations to

suit the process and controls requirements.

Sections are mounted to a heavy-duty steel stand with durable and lockable casters

for ease of mobility and stability. Stands can be adjusted to accommodate

various width heat sections.

Optional blowers can be integrated into heat sections to add air to the finishing or

dry-off process; and to wick away moisture during the cure of water based coatings.

All standard model banks have a 100A rated disconnect, with ON/OFF switch with

lockable handle.